Do you need a permit to dig a well in Florida?

A permit is required prior to the construction of all new wells and the repair, modification or abandonment of an existing well regardless of the size. The permit ensures that wells are built by licensed water well contractors and conform to water well construction standards within the State of Florida.

Can I dig my own well in Florida?

All wells must be constructed by a licensed water well contractor. The only exception to this law is for a water well two (2) inches or less in diameter constructed by an individual for his/ her own private use on his/her owned or leased property as specified in Section 373.326(2), Florida Statutes.

Can you dig a well anywhere in Florida?

Q: Yes. Artesian and Floridan Aquifer wells are permitted in your area. They can be drilled for several different purposes(home use, geothermal, irrigation, etc.). PWD drills many Floridan Aquifer wells and keeps a record of each one.

Can I dig a well myself?

Drilling a well by hand is a lot of work, but it can be done with the right equipment. Whether you're looking to drill a shallow or deep well, this skill is perfect for those seeking self-reliance.

Do you need permission to dig a well?

Landowners have a right to access any water beneath their ground. This means there is no need to acquire planning permission to drill a water borehole, thus making it easy for a developer to install a borehole during a property build process.

Is It Really Illegal To Drill Your Own Well???

How deep should a well be dug for drinking water?

In order to allow for maximum ground filtration to remove impurities, your well depth should be at least 100 feet. As a general rule, the deeper you drill, it's more likely that there will be minerals present. Which could require the installation of a water softening unit.

How long do wells last in Florida?

A water well professional can help you schedule further inspection, maintenance and testing to keep your new well system operating at peak capacity. A properly constructed and maintained well can provide 20+ years of safe drinking water for you and your family.

How deep is a typical well in Florida?

Florida Well Depth Requirements

Florida wells can go as deep as 1000 feet, but most in our area of North Central Florida run 100 to 400 feet because the aquifer is closer to the ground's surface. For most homeowners, a 3-4 inch diameter well outfitted with a pump works best.

How deep of a well do I need in Florida?

How deep should your well be? Where you are in the district determines how deep your well must be to get water. For example, throughout central Florida, the Floridan aquifer is 100 to 200 feet beneath the land's surface.

Can a well be built anywhere?

Ask The Builder: You can drill a well almost anywhere, but beware local regulations (and pollutants)

Can I install my own drain field in Florida?

In Florida, who is allowed to do work on a septic system? A homeowner can do septic work only on his or her owner-occupied, single-family home.

Do you pay for well water in Florida?

Well water is free water because you do not need to pay a municipal fee.

How far down is water in Florida?

Aquifer facts

The Floridan aquifer averages 1,000 feet thick, and freshwater can extend to a depth of 2,000 feet below land surface. Freshwater is thickest in the central portions of the state and rapidly thins toward the coast and the south.

Can you drink Florida well water?

The majority of these wells produce water that tastes good and is free of harmful contaminants. Unfortunately, certain chemicals and bacteria that may cause disease have been found in some wells in Florida.

Can a well dry up in Florida?

Because Florida is blessed with a plentiful supply of water, the answer to the question “Do Water Wells Run Dry?” is yes, although not frequently.

Does deep well run out of water?

Not likely. It depends on many factors, but generally most modern wells are dug deep enough so that they should never “run dry” in their lifetime.

How hard is well water in Florida?

Florida's Land Contains Large Amounts of Limestone

According to the U.S. Geological Survey (USGS), most of the ground water found in Florida contains between 121 and 180 milligrams per liter of hard minerals.

How much does it cost to dig a well deeper in Florida?

An average cost of water well drilling is $2,750 to $7,550, while installing a septic tank water system costs $6,500 and $20,000. Get free estimates from the best well drilling company in Florida or discuss the well drilling process now. Request Online Quotes!

Do wells fill up when it rains?

While your well is a 6” hole in the ground, it is not directly replenished by rainfall, as you might expect a cistern to function. The rainfall that seeps into the ground on your property moves through the soil at a rate of only 10 feet per year.

What are the 3 types of wells?

Types of Wells

According to the United States Environmental Protection Agency (EPA), there are three basic types of private drinking wells dug, drilled, and driven .

How often do wells need to be cleaned?

As a routine maintenance practice, clean your well at least once a year. If you have an iron or sulfur bacteria problem, clean more often.

How do I find underground water for my well?

Clues For Finding Groundwater
  1. Ask locals where they currently get their water. ...
  2. Sand or gravel areas in the bottom of valleys will often be home to groundwater. ...
  3. Natural springs usually indicate groundwater is nearby. ...
  4. If there are streams in the area, look for sections where the flow is greater.

How do I find out the depth of my water table?

The most reliable method of obtaining the depth to the water table at any given time is to measure the water level in a shallow well with a tape. If no wells are available, surface geophysical methods can sometimes be used, depending on surface accessibility for placing electric or acoustic probes.