How long does a well last in Florida?

A well in Florida can last anywhere from 20 to 50 years, sometimes longer, but this depends heavily on construction quality, maintenance, and local water/soil conditions, with pumps and tanks needing replacement more often (8-15 years). Proper care, like annual testing, keeping chemicals away, and addressing issues like mineral buildup, significantly extends its life.

How much does it cost to replace a well in Florida?

The cost of drilling a 100 feet well and installing of the casing and the well cap will be $2,000 to $3,000. Underground piping, well pump (used to bring the water to the surface), and pressurized storage tanks will cost around $2,000 to $5,000. So a 100 feet well in Florida can cost you $5,000 in total.

How often should a well be replaced?

A well itself can last decades (20-50+ years), but its components, especially the pump, need replacing every 8-25 years, depending heavily on usage, water quality (sediment/minerals), maintenance, and if the pump size is correct. Signs it's time for a new pump include low pressure, no water, constant running, or air from faucets, with annual inspections recommended to catch issues early. 

How long do wells last in Florida?

A water well professional can help you schedule further inspection, maintenance and testing to keep your new well system operating at peak capacity. A properly constructed and maintained well can provide 20+ years of safe drinking water for you and your family.

How to tell if an old well is good?

Important things to review during an inspection are the isolation distances from potential contamination sources, and the adequate height of the well casing above the ground surface (at least 12 inches). It is also a good idea to check the water pressure, any water treatment equipment, and aesthetic water quality.

How Long Does A Sand Point Well Last? [ Know Details ]

What is the average cost to replace a well pump?

The average cost to replace a well pump typically falls between $900 and $4,000, with most homeowners spending around $1,800 to $3,000 for equipment and professional installation, but prices vary significantly by pump type (shallow jet, deep submersible, constant pressure) and well depth, with deeper wells and advanced systems costing more. Expect to pay more for deep wells or upgrades like constant-pressure systems, potentially reaching $5,000 or more. 

How do I know if my well needs to be replaced?

5 Signs You Might Need a New Water Well

1. Noticeable Changes in Water Quality. Changes in the appearance, taste, or odor of your water can indicate potential issues with your well. ...
2. Reduced Water Flow or Pressure. ...
3. Spikes in Your Electric Bill. ...
4. Frequent Pump Cycling. ...
5. Constant Need for Repairs.

How often should a well be flushed?

It is generally recommended to flush your well at least once a year. Regular well flushing helps maintain the quality and performance of your well system. Over time, sediment, minerals, bacteria, and other contaminants can accumulate in the well, affecting water quality and reducing the well's efficiency.

How deep are most wells in Florida?

Florida Well Depth Requirements

Florida wells can go as deep as 1000 feet, but most in our area of North Central Florida run 100 to 400 feet because the aquifer is closer to the ground's surface. For most homeowners, a 3-4 inch diameter well outfitted with a pump works best.

What's the average cost of a well inspection?

The cost of a well inspection is $375 on average, but it's normal to spend between $250 and $500 or more. If the depth of your well is 50 feet or less, you can expect to pay between $250 to $350 for an inspection. Wells more than 500 feet deep cost $500 or more to inspect.

What is the most common contaminant in well water?

Bacteria. Bacteria is a common microbial contaminant that can be introduced into ground water through a combination of well construction characteristics, surface to groundwater geologic pathways, intense rain events, and various surface activities. A common test for bacteria is the "total coliform bacteria" test.

Can a plumber replace a well pump?

Well pumps are intricate pieces of equipment. Hiring licensed and insured professionals like Mr. Rooter Plumbing® for well water pump replacement and installation is best to ensure safety and efficiency.

Will a well increase my property value?

The existence of a well on a property can influence its resale value and insurance considerations. Properties with well-maintained, high-quality, and reliable wells are likely to be more desirable and can attract a premium. However, poorly maintained wells might reduce property value or increase insurance costs.

Do I need a permit for a well in Florida?

A permit is required prior to the construction of all new wells and the repair, modification or abandonment of an existing well regardless of the size. The permit ensures that wells are built by licensed water well contractors and conform to water well construction standards within the State of Florida.

Is there a monthly bill for well water?

One benefit of installing your own well is that you'll no longer need to pay municipal water bills. You'll only need to pay for the electricity to operate the pump (about $3–$4 per month), plus maintenance costs of $100–$250 per year. Compared to a monthly utility bill of $20–$40, you can save up to $500 a year.

Is it common to run out of water on a well?

But like other water resources, your well water can dry up if you fail to manage it properly or due to natural causes. Often, wells run out of water temporarily, and there are reasons this issue occurs.

How much does it cost to put in a water well in Florida?

A well in Florida can cost anywhere from $3,000 for a shallow 100-foot well to over $20,000 for a deep well, with total costs depending heavily on depth, casing material, pump quality, and local permits, often ranging from $5,000 to $15,000+ for typical residential needs. Expect to pay roughly $15-$30 per foot for drilling, plus significant extra costs for pumps, tanks, piping, and electrical work, which can double the base drilling price. 

Do deeper wells mean better water?

If you install a shallow well, your water quality will be most influ- enced by your activities and those of your neighbors. If you install a deeper well, your water quality will be influenced by land uses farther uphill from you in the groundwater flow system.

How can you tell if your well is bad?

The 7 Warning Signs Associated with Water Well Problems

Water pressure is low (pressure tank symptoms) or water flow problems. The power bill has skyrocketed. The water pump for the well keeps running. The pressure switch and pump continuously cycle on and off (short-cycling).

How often does a well need to be shocked?

You should shock your well annually as preventative maintenance, but more often if you notice bad smells/tastes, after repairs/flooding, or if your water tests positive for bacteria like coliform. Some sources suggest shocking once a year in spring, while others advise against frequent shocking, emphasizing testing first, as it can be hard on the well, especially with iron/sulfur issues, recommending professional treatment instead for persistent problems. 

Does homeowners insurance cover well going dry?

No, standard homeowners insurance generally does not cover a well going dry from natural causes (drought, low water table) or lack of maintenance, as it's considered a gradual issue, not a sudden covered event like a burst pipe or lightning strike. However, it might cover well pump damage if a covered peril (like a storm, fire, or lightning) caused the failure, but not for age, wear-and-tear, or general breakdown. You can often buy separate endorsements or home warranties for mechanical failures.
 

What is the average cost of a well pump replacement?

The average cost to replace a well pump is $1,899, but most spend between $975 to $2,824 depending on the pump type and size.

Does a well go bad if not used?

As a well ages, the casing may rust, joints may leak, the pump may become stuck in the well, or the well may fill with debris. If the well is covered with boards or concrete, the cover will eventually decay and break open. Surface water runoff, debris and other contaminants can then enter the well.